Maker Pro
Maker Pro

rc circuit

akash bhatia

May 19, 2016
6
Joined
May 19, 2016
Messages
6
i want a simple circuit diagram of these two circuits.
 

Attachments

  • xZZrjxD7FpI.jpg
    xZZrjxD7FpI.jpg
    18 KB · Views: 91
  • YABXy0kscIc.jpg
    YABXy0kscIc.jpg
    19.9 KB · Views: 61

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,764
Joined
Nov 17, 2011
Messages
12,764
These schematics are o.k., If you want to modify them, go ahead and just do it.
Where's the question?
 

akash bhatia

May 19, 2016
6
Joined
May 19, 2016
Messages
6
These schematics are o.k., If you want to modify them, go ahead and just do it.
Where's the question?
i want to know where will be the battrey connceted and second in the circuit there is component name tsop 36k ..how i will connect this
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,764
Joined
Nov 17, 2011
Messages
12,764
The battery is connected from 4.2V to Ground (the three little dashes in the lower left).

TSOP36k is a 36kHz infrared receiver. There are many variants available, see e.g. here (there are also datasheets on this page).
 

akash bhatia

May 19, 2016
6
Joined
May 19, 2016
Messages
6
The battery is connected from 4.2V to Ground (the three little dashes in the lower left).

TSOP36k is a 36kHz infrared receiver. There are many variants available, see e.g. here (there are also datasheets on this page).
the positive terminal goes to +4-2 v right and the negativa will be connected to earth wiire right
 

akash bhatia

May 19, 2016
6
Joined
May 19, 2016
Messages
6
Li-pol accum voltage 3,7-4,2 volts..what is the meaning of the sentense this is also related to the upper circuit
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,764
Joined
Nov 17, 2011
Messages
12,764
Look in the datasheet of the specific TSOP component you choose and find the corresponding pins.
 
Top