RC transmiter

[Dany]

Hi
I'm flying radio controled aircraft models .
I thought to increase the transmited power from the transmiter
can anyone tell me how to do that?????

 

[Dbowey]

Dany posted:

<< I'm flying radio controled aircraft models .
I thought to increase the transmited power from the transmiter
can anyone tell me how to do that?????
Hi, I too, do RC planes.

Transmitter mods are not too complex, but unless you have equipment to check it
for output waveform and spurious signals, it isn'tt a good idea to do them.
There's too much potential for killing a plane on a nearby channel.

It would cost less to get a new TX anyhow. The GWS four-channel for example.
What are you using now?

Also, if range is a problem you should invest in a better receiver before you
think you need a better transmitter.

Don

 

[Nick]

I can't fathom why you need more power.
I used to fly a 10 foot RC glider to over 12,000 feet without any power
problems. Only problem I had was keeping an eye on it. At that
distance it is only a speck and usually require binoculars to see.

 

[Rich Grise]

Hi
I'm flying radio controled aircraft models .
I thought to increase the transmited power from the transmiter
can anyone tell me how to do that?????

Just hold the transmitter sideways so that the axis of the
antenna is perpendicular to line-of-sight. Maybe look up
"radiation pattern" or "cone of silence".

Good Luck!
Rich