D
Dani
- Jan 1, 1970
- 0
RCA Model # F27665YX1 Chassis # CTC203AX, with onboard tuner, & one
ribbon Gemstar module, dead, nothing blown, standby voltages ok. + 139
volt,+ 33 volt, - 11.9 volt, + 2.4 volt,
& + 5 volt are all ok, but no + 12 volt input to U14104. At startup, as
the unit tries three times to come on, I get about + 7 volts that
momentarily comes up, & drops right away. Even with a low current
source applied to U14104, the unit won't start. I replaced the flyback
with a "known good one". I don't have a "known good" Gemstar module,
but I took it out, & tried another one, still no
go. Cr 14701 flyback secondary was the cause of a set with a similar
problem, but this one got me stumped. Any ideas anyone? Thanks, Dani.
ribbon Gemstar module, dead, nothing blown, standby voltages ok. + 139
volt,+ 33 volt, - 11.9 volt, + 2.4 volt,
& + 5 volt are all ok, but no + 12 volt input to U14104. At startup, as
the unit tries three times to come on, I get about + 7 volts that
momentarily comes up, & drops right away. Even with a low current
source applied to U14104, the unit won't start. I replaced the flyback
with a "known good one". I don't have a "known good" Gemstar module,
but I took it out, & tried another one, still no
go. Cr 14701 flyback secondary was the cause of a set with a similar
problem, but this one got me stumped. Any ideas anyone? Thanks, Dani.
