Maker Pro
Maker Pro

RCA 27" Tv, odd problem.

D

Dani

Jan 1, 1970
0
Model # 27R410T Chassis ITC008FAM. Was repaired for going off
horizontal months ago. Now,
sometimes it works ok, other times it won't start, just shuts right
down, with no high voltage. When it's running, all the SMPS
secondaries roam around a bit, but settle down if the G 2 is set "just
right" Then it works fine. Are the flybacks so crappy, that it can
make the set unusable, if set wrong or "drift" slightly? Dani.
 
M

Meat Plow

Jan 1, 1970
0
Model # 27R410T Chassis ITC008FAM. Was repaired for going off
horizontal months ago. Now,
sometimes it works ok, other times it won't start, just shuts right
down, with no high voltage. When it's running, all the SMPS
secondaries roam around a bit, but settle down if the G 2 is set "just
right" Then it works fine. Are the flybacks so crappy, that it can
make the set unusable, if set wrong or "drift" slightly? Dani.

Sounds like a reasonable assumption.
 
A

Art

Jan 1, 1970
0
Especially if an aftermarket LOPT has been installed when the original
failed.
 
Top