Maker Pro
Maker Pro

RCM 3000 Rabbit Module Test fixture

auriuman78

Oct 11, 2012
6
Joined
Oct 11, 2012
Messages
6
Hi,
I work with rabbit 3000 modules (AT56C55-UL2T processor/RTL8019AS comm) on a daily basis and I need a better way than I currently have to test them. I'm placing it in programming because I'll need advice in this area to build a test fixture. Currently I place them in operational configuration to test them but this requires 10 - 15 minutes per rabbit module. This is a lot of time. All suggestions are welcome. Thanks.
 
Last edited:
Top