Maker Pro
Maker Pro

Realistic STA-2270 receiver (Radio Shack)

Lare

Sep 6, 2018
3
Joined
Sep 6, 2018
Messages
3
Newbie here..

I have a Realistic STA-2270 receiver that has a bad volume control Pot. Anyone know of an OEM or equivalent Pot that will fit into my 2270? Source?

Please email me at: [Moderator edit: E-Mail removed, please use PM (conversation) to contact the op]

Thank you!
 
Last edited by a moderator:

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Post clear pics of the part. We often get such requests for parts id-ing but have more experience for image comparisons than access to BOMs that manufacturers might (not) make available.
 

VenomBallistics

Aug 30, 2018
285
Joined
Aug 30, 2018
Messages
285
surfed around and just happened to see the livin inards of one on a Canadian swap shop site.
fear not ... by the looks of the backside of the part, this may actually be a home gamers job.

I can remember when this was probably the model you settled for in this era of 100 watts or nothing. but then, today, 65 watts worth of discrete component power has become kinda special

Ill leave this here for some mid 80's audio porn
https://www.canuckaudiomart.com/details/188873-realistic_sta2270/images/249771/
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
that has a bad volume control Pot.
You can easily find potentiometers of various sizes and values on one of the many retailer's sites.
Note that volume control pots usually have a logarithmic characteristic and in your case the pot should be stereo, too.

Why do you think you need to replace the pot? Have you tried repairing the pot? Not a job for the faint of heart but manageable. See.g. these sites:
Mechanically
Using special cleaner
Miscellaneous tips from another forum.

Good luck,
Harald
 

Squilliam

Dec 20, 2018
2
Joined
Dec 20, 2018
Messages
2
I probably have one you can have for free. Probably around 5 bucks to ship it. Could work something out for that. Let me know.
 

Squilliam

Dec 20, 2018
2
Joined
Dec 20, 2018
Messages
2
I've parted out a few of these machines or related, 2280, 2600, 2500. Anyway I know what your looking for. It has a shaft that real long, 2 or 3 inch. Sorry for the two reply's, at work.. lol
 

Lare

Sep 6, 2018
3
Joined
Sep 6, 2018
Messages
3
I probably have one you can have for free. Probably around 5 bucks to ship it. Could work something out for that. Let me know.

Yes! Thank you! Very generous of you. Could you call me late afternoon some day at 319-436-7277. I have some equipment you may want, or tell me how much to send you to your address.

Larry Jenkins
319-436-7277 or larry.Jenkins@outlook,com
 

Lare

Sep 6, 2018
3
Joined
Sep 6, 2018
Messages
3
Bill sent me the parts right away and said, due to the cost of shipping was so low, that no payment is necessary. I sent him some anyway. There are a few like Bill still around.. Thank you, Sir!

Lare
 
Top