Maker Pro
Maker Pro

recomended lowish volume flyback vendor

H

Hawker

Jan 1, 1970
0
Does anyone have a vendor they like working with that works NRE +
production cost for low volume SMPS flyback topology transformers.

I need an EP-13 size transformer designed and produced for an NCP-1012
5w dual output design. My client is low volume at around 200 per year.
All the folks I currently use are better set up for 1,000-20,000 EAU and
not a good choice for this low a volume.

I have little experience at these low volumes so could use some advice.

Thanx
Hawker
 
J

John Larkin

Jan 1, 1970
0
Does anyone have a vendor they like working with that works NRE +
production cost for low volume SMPS flyback topology transformers.

I need an EP-13 size transformer designed and produced for an NCP-1012
5w dual output design. My client is low volume at around 200 per year.
All the folks I currently use are better set up for 1,000-20,000 EAU and
not a good choice for this low a volume.

I have little experience at these low volumes so could use some advice.

Thanx
Hawker


http://www.minntronix.com/content/pages/default.asp

Talk to Butch.

or

http://www.precision-inc.com/

Alan Kamann is the designer here.

Both do good work in modest quantities.

John
 
H

Hawker

Jan 1, 1970
0
Top