Maker Pro
Maker Pro

Recommendation for re-winding transformer?

Bluejets

Oct 5, 2014
6,865
Joined
Oct 5, 2014
Messages
6,865
Do you have a photo of your transformer?
Measurements of the physical size would also benefit.
Just it will give a better idea on complexity of any rewind.
 

kellys_eye

Jun 25, 2010
6,502
Joined
Jun 25, 2010
Messages
6,502
Output transformer or mains supply?

If mains, you can usually source a replacement equivalent (unless you're trying to do a restoration and want an identical replacment) but if it's an output transformer then have a go at rewinding it yourself!
 

Bluejets

Oct 5, 2014
6,865
Joined
Oct 5, 2014
Messages
6,865
Output transformer or mains supply?

Link shows.......
The 222-C power transformer has the following characteristics:

Primary: 117 VAC

Secondary:

360-0-360 VAC @ 150 mA

50 VAC @ 150 mA

6.3 VAC @ 5A

5.0 VAC @ 2.0A

not a standard run-of-the-mill replacement I would think
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,654
Joined
Nov 17, 2011
Messages
13,654
Why do you think the transformer is bad? Transformers (the electrical type :) ) usually are rather rugged.
 
Top