Maker Pro
Maker Pro

Reduce amperage without reducing voltage. Diodes? [Noob]

Ian24

Jan 30, 2018
3
Joined
Jan 30, 2018
Messages
3
Hello, i have to ask something quite important to me. Okey here i have a (11 Volts Motor), that will draw about (4.27 to 15.83 Amps). And i have an ESC/ circuit board that can only capable handling anything below (8 Amps). There is method that might can help me out,by placing Diodes and ensure its not go over (8 Amps). Do you think it will work? or is there any better ways? Advance Thanks :)
 

Alec_t

Jul 7, 2015
3,596
Joined
Jul 7, 2015
Messages
3,596
..... or run the motor from a 6V supply for safety (although that's not what you want).
 
Top