Maker Pro
Maker Pro

Regarding XTR110 V to I converter

A

asm

Jan 1, 1970
0
Hi,
Can any one tell me whether XTR110 V to I convereter is meant only for
DC voltages or works fine wid AC voltages as well ...
Regards,
Asmita
 
T

Tom Bruhns

Jan 1, 1970
0
Hi,
Can any one tell me whether XTR110 V to I convereter is meant only for
DC voltages or works fine wid AC voltages as well ...
Regards,
Asmita

It's in the current data sheet from the TI web site. See the spec for
"dynamic response settling time" for instance. The input voltage
should be offset from zero, a suggested by figure 6 in the data
sheet: if the input voltage range is 0 to 10 V for 4 to 20mA output,
then you can input a 10V p-p AC signal if you bias it with +5V DC, so
it swings from 0 to +10V.


Cheers,
Tom
 
Top