Maker Pro
Maker Pro

Remote control for CyberHome CH-DVD 300S DVD player

S

Sam Goldwasser

Jan 1, 1970
0
(Repeat of post of Feb 26.)

I know it's a piece of s*** but does anyone by chance have a working
remote for this thing they'd part with? I repaired the player's power
supply (bad e-cap) but the front panel functions really aren't complete.

Thanks.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
M

Meat Plow

Jan 1, 1970
0
(Repeat of post of Feb 26.)

I know it's a piece of s*** but does anyone by chance have a working
remote for this thing they'd part with? I repaired the player's power
supply (bad e-cap) but the front panel functions really aren't complete.

Thanks.


Did you try 1 800 remotes? http://remotes.com/ Look for the part number
RMC 300Z. From my experience most Cyberhome used the same or very similar
remote. I have a home unit and portable LCD and they use the same remote.
 
H

Homer J Simpson

Jan 1, 1970
0
Sam Goldwasser said:
(Repeat of post of Feb 26.)

I know it's a piece of s*** but does anyone by chance have a working
remote for this thing they'd part with? I repaired the player's power
supply (bad e-cap) but the front panel functions really aren't complete.

No but http://rapidshare.com/files/18329259/Jensen_Remotes.pdf is a link for
the Jensen Remotes 300/400/500 manual. They seem to work OK with a lot of
things and they're often cheap now the company is toast.

..
 
Top