Maker Pro
Maker Pro

Repairing a set top box.

M

moo

Jan 1, 1970
0
Hi all, new to this forum an electronic device repair. I have been given
a few items that are faulty to learn repair on and I currently am
working on a set top box the picture comes up fine but when I go to scan
the channels the signal strength is exactly 0 nothing at all, I have
tested various points on the board for voltage with a fluke and it all
checks out, the cables are fine. And im assuming the rf modulator box is
as well because im getting the display on screen when I plug the RF
cable in from the wall. Just no signal strength. I at a bit of a loss as
to where to start looking and cant find a service manual online to give
me any clues. the board is marked as DVB-TH MB04 rev 1.2. Some jaycar
product bought a few years ago. If someone could please point me in the
right direction it would be very much appreciated.

Thanks for your time.
 
M

moo

Jan 1, 1970
0
Hi all, new to this forum an electronic device repair. I have been given
a few items that are faulty to learn repair on and I currently am
working on a set top box the picture comes up fine but when I go to scan
the channels the signal strength is exactly 0 nothing at all, I have
tested various points on the board for voltage with a fluke and it all
checks out, the cables are fine. And im assuming the rf modulator box is
as well because im getting the display on screen when I plug the RF
cable in from the wall. Just no signal strength. I at a bit of a loss as
to where to start looking and cant find a service manual online to give
me any clues. the board is marked as DVB-TH MB04 rev 1.2. Some jaycar
product bought a few years ago. If someone could please point me in the
right direction it would be very much appreciated.

Thanks for your time.

im assuming the rf modulator box is
 
N

N_Cook

Jan 1, 1970
0
moo said:
Hi all, new to this forum an electronic device repair. I have been given
a few items that are faulty to learn repair on and I currently am
working on a set top box the picture comes up fine but when I go to scan
the channels the signal strength is exactly 0 nothing at all, I have
tested various points on the board for voltage with a fluke and it all
checks out, the cables are fine. And im assuming the rf modulator box is
as well because im getting the display on screen when I plug the RF
cable in from the wall. Just no signal strength. I at a bit of a loss as
to where to start looking and cant find a service manual online to give
me any clues. the board is marked as DVB-TH MB04 rev 1.2. Some jaycar
product bought a few years ago. If someone could please point me in the
right direction it would be very much appreciated.

Thanks for your time.

First you have to check whether it has fallen foul of not enough EEprom for
the current useage,

"Split NIT "
 
M

moo

Jan 1, 1970
0
First you have to check whether it has fallen foul of not enough EEprom for
the current useage,

"Split NIT"

Thanks :) I just done a bit of googling about so Im onto this Split NIC
suggestion. If it is the case is it a matter of rewriting the eeprom, or
essentially does the change in freeview spec make this a paperweight?
 
M

moo

Jan 1, 1970
0
First you have to check whether it has fallen foul of not enough EEprom for
the current useage,

"Split NIT"


Thanks :) I just done a bit of googling about so Im onto this Split NIC
suggestion. If it is the case is it a matter of rewriting the eeprom, or
does the change in freeview spec essentially make this a paperweight?
 
A

Adrian C

Jan 1, 1970
0
Thanks :) I just done a bit of googling about so Im onto this Split NIC
suggestion. If it is the case is it a matter of rewriting the eeprom, or
does the change in freeview spec essentially make this a paperweight?

I think 'Spilt NIT' is a UK issue.

Are you in Australia?
 
M

moo

Jan 1, 1970
0
I think 'Spilt NIT' is a UK issue.

Are you in Australia?
Yes im from Australia I noticed a few things about the uk having the
issue but cant find much about Australia.... noticed the tuners are
quiet loose so im going to take a shot a replacing them and go from
there.... Thanks for your input.
 
Top