Maker Pro
Maker Pro

Repairing Lincoln Plasma Cutter inverter board...

fics

Dec 13, 2015
1
Joined
Dec 13, 2015
Messages
1
I'm going to try fixing the inverter board for a Lincoln ProCut 25 plasma cutter...I found the problem, the transformer lead at the board is broken...(guess the factory installed tie wrap didn't hold it securely) but I can't find the part....I need help...much appreciated:) 100_4707.JPG
 

dorke

Jun 20, 2015
2,342
Joined
Jun 20, 2015
Messages
2,342
Try here.
It is either you get an original transformer
or if possible try to re-solder the broken end .

Can you please post a photo so we can evaluate the soldering option?
 
Top