Maker Pro
Maker Pro

Replace Hoverboard MOSFET.

Sayed Amjad

Apr 13, 2021
2
Joined
Apr 13, 2021
Messages
2
Replace hoverboard MOSFET. Any?
Hi There.,
I have a hoverboard with a fried RU6888R mosfet
According to PDF, it is a N channel 68volt 88 Amp MOSFET, TO-220
Can I just use ANY MOSFET which is N channel, >=68volt, >88Amps, in TO220 format? Also same pin order "GDS"
I can't find any "official" replacement for this one I'm looking for

Thanks!
 

bertus

Moderator
Nov 8, 2019
2,629
Joined
Nov 8, 2019
Messages
2,629
Hello,

Also check the gate capacitance and gate threshold voltage.
Also Rds(on) is an important parameter.

Bertus
 

Bluejets

Oct 5, 2014
5,850
Joined
Oct 5, 2014
Messages
5,850
Replace hoverboard MOSFET. Any?
Hi There.,
I have a hoverboard with a fried RU6888R mosfet
According to PDF, it is a N channel 68volt 88 Amp MOSFET, TO-220
Can I just use ANY MOSFET which is N channel, >=68volt, >88Amps, in TO220 format? Also same pin order "GDS"
I can't find any "official" replacement for this one I'm looking for

Thanks!

Ebay has them in their thousands, so I'd expect them to be available also on digikey, amazon etc.
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=ru6888r&_sacat=0
 
Top