Maker Pro
Maker Pro

Replacing EL backlit LCD with LED backlit LCD

J

Jim T. Kirk

Jan 1, 1970
0
One of the panels on the bridge has an EL backlit LCD. The backlight on
this unit fades badly over time and the inverter is also prone to
failure, so I sometimes need to fix them. Not only that, but EL backlit
LCDs seem to be getting hard to find, and in particular the LCD module
used in this unit is now almost impossible to find.

So I'm thinking maybe I could start using LED backlit LCDs, which
are much easier to find. The inverter for the original LCD takes
5V dc input and produces 100V ac at 400Hz. I'm thinking I could
just bypass the inverter altogether and route its 5V dc input
directly to the LED backlight.

Is this a reasonable plan?

Would I need to worry about the LED backlight drawing too much
power?



Kirk out ...
 
M

Michael A. Terrell

Jan 1, 1970
0
Jim T. Kirk said:
One of the panels on the bridge has an EL backlit LCD. The backlight on
this unit fades badly over time and the inverter is also prone to
failure, so I sometimes need to fix them. Not only that, but EL backlit
LCDs seem to be getting hard to find, and in particular the LCD module
used in this unit is now almost impossible to find.

So I'm thinking maybe I could start using LED backlit LCDs, which
are much easier to find. The inverter for the original LCD takes
5V dc input and produces 100V ac at 400Hz. I'm thinking I could
just bypass the inverter altogether and route its 5V dc input
directly to the LED backlight.

Is this a reasonable plan?

Would I need to worry about the LED backlight drawing too much
power?

Kirk out ...


Ask Scotty to fix it. Don't bother Doctor McCoy, he'll just tell
you, "Dammit Jim! I'm not an engineer!"


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
Top