REQ: O-scope manual

[john james]

I recently purchased an oscilloscope that i am attempting to locate a
manual for. the only marking on it is on the faceplate that reads:

3133 25MHZ DUAL TRACE OSCILLOSCOPE

I believe that it is made by Crotech.

Does anybody have any idea where i can obtain a manual for it from?

Eddie

 

[Jean-Yves]

I recently purchased an oscilloscope that i am attempting to locate a
manual for. the only marking on it is on the faceplate that reads:

3133 25MHZ DUAL TRACE OSCILLOSCOPE

I believe that it is made by Crotech.

Does anybody have any idea where i can obtain a manual for it from?

Eddie

what do you want to do with this scope ???
all these basic scopes are easy to use
and you can pick up the manual of any 25mhz scope on the net
the commands won't be very different

 

[john james]

Well, I am trying to find some specific items about this particular
item.. for instance, there are no marking on what the voltage and
frequency on the calibration probe point to indicate what it SHOULD be
reading.. I am use to the tektronics 465, but mine has died, so i
picked up this one until i am able to get mine repaired.. It just does
not have the same comfortable feel.. thought a manual might help me
get acquainted with it better..

 

[Jean-Yves]

Well, I am trying to find some specific items about this particular
item.. for instance, there are no marking on what the voltage and
frequency on the calibration probe point to indicate what it SHOULD be
reading.. I am use to the tektronics 465, but mine has died, so i
picked up this one until i am able to get mine repaired.. It just does
not have the same comfortable feel.. thought a manual might help me
get acquainted with it better..

it is most of the times 1khz or 2khz
and 1Vpp or 600mVpp

look at what is most approching for you ?

or
measure a known waveform going out from a waveform generator ?