I am absolutely a newbie in PIC programming. Only have experience of playing with LEDs.
For a new project, I am considering to incorporate PIC16F887 or something similar.
Following is the flow of the process:
1) Power ON
2) Analog section sends outputs from 6 optocouplers to the PIC
3) Depending upon the state (High/Low) of these inputs from the optocouplers, the PIC processes and sends output to some, LEDs and 3 relays via transistors.
4) The relays revise the outputs of the optocouplers
5) Again the PIC processes and sends the final output to LEDs
How the outputs from the optocouplers be interfaced with the PIC?
I shall be using PICBasicPro.
For a new project, I am considering to incorporate PIC16F887 or something similar.
Following is the flow of the process:
1) Power ON
2) Analog section sends outputs from 6 optocouplers to the PIC
3) Depending upon the state (High/Low) of these inputs from the optocouplers, the PIC processes and sends output to some, LEDs and 3 relays via transistors.
4) The relays revise the outputs of the optocouplers
5) Again the PIC processes and sends the final output to LEDs
How the outputs from the optocouplers be interfaced with the PIC?
I shall be using PICBasicPro.