Maker Pro
Maker Pro

ribbon controller

darren adcock

Sep 26, 2016
463
Joined
Sep 26, 2016
Messages
463
Hi all, been a while.

I have been busy going through Make: Analogue Synths. I have just finished my Noise Toaster.

I am wanting to make a ribbon controller for the external vco input but I can't seem to find build instructions or a schematic, has anyone got a good link for me please?

Best

Darren
 

darren adcock

Sep 26, 2016
463
Joined
Sep 26, 2016
Messages
463
Cheers. Yes that looks accessible to me, I will begin ordering parts. Can I use VHS (blank) for this, I've seen that mentioned elsewhere. I love that it can be two tones.

I know nothing about MIDI but I keep seeing it mentioned. If I understand this schem It should just connect straight into my External VCO jack.

I will post pics as soon as I can.
 

darren adcock

Sep 26, 2016
463
Joined
Sep 26, 2016
Messages
463
After reading around It seems that the Paia schem doesn't work. I'll keep searching. Could I not just replace a pot in a 555 PWM with a ribbon? would be a single tone, the noise toaster has a gate so i woldn't have to think about that.
 
Top