ElisonMonteiro
- May 25, 2023
- 1
- Joined
- May 25, 2023
- Messages
- 1
Does anyone know how I can configure proteus to change the key position at certain times?
Example: at t=1s I need the switch to be in position 2. At t=4s the switch must be in position 1....
But I need this to be done automatically with defining these changes.
Example: at t=1s I need the switch to be in position 2. At t=4s the switch must be in position 1....
But I need this to be done automatically with defining these changes.
