Maker Pro
Maker Pro

Samsung 43" rear projection.

D

Dani

Jan 1, 1970
0
Dead, won't come on, led is on at standby, & just flashes at turn with
remote, indicating SMPS is ok, & getting signal to turn on. Unplug
connector CNZ04 from convergence, pop in speakers, tries to start, but
shuts right down. Sanyo STK 394-250 IC's seem ok, & all fusible
resistors check fine. Can't get at the board to do measurements,
without removing it totally. No leaks.
Anything common on this model? Dani.
 
D

Dani

Jan 1, 1970
0
Model # HC-R4351WX/XZC. Chassis # P60B

Dead, won't come on, led is on at standby, & just flashes at turn with
remote, indicating SMPS is ok, & getting signal to turn on. Unplug
connector CNZ04 from convergence, pop in speakers, tries to start, but
shuts right down. Sanyo STK 394-250 IC's seem ok, & all fusible
resistors check fine. Can't get at the board to do measurements,
without removing it totally. No leaks.
Anything common on this model? Dani.
 
J

Jamie

Jan 1, 1970
0
Dani said:
Model # HC-R4351WX/XZC. Chassis # P60B

Dead, won't come on, led is on at standby, & just flashes at turn with
remote, indicating SMPS is ok, & getting signal to turn on. Unplug
connector CNZ04 from convergence, pop in speakers, tries to start, but
shuts right down. Sanyo STK 394-250 IC's seem ok, & all fusible
resistors check fine. Can't get at the board to do measurements,
without removing it totally. No leaks.
Anything common on this model? Dani.
Sure, Check the HOT Section and fly back maybe! :)
 
M

Meat Plow

Jan 1, 1970
0
Dead, won't come on, led is on at standby, & just flashes at turn with
remote, indicating SMPS is ok, & getting signal to turn on. Unplug
connector CNZ04 from convergence, pop in speakers, tries to start, but
shuts right down. Sanyo STK 394-250 IC's seem ok, & all fusible
resistors check fine. Can't get at the board to do measurements,
without removing it totally. No leaks.
Anything common on this model? Dani.

Convergence IC, common problem.
 
A

Art

Jan 1, 1970
0
Check the set throughly for possible leaks from the crt coolant chambers.
 
Top