It just stopped working. No fluorescent backlight. No "No Signal" display (like it usually does when not connected to PC) or able to see main menu Setup Menu display. However, if I look close, I think I can see something (so I think the logic board is working).
So, looking close at Power Board first. No obvious cold solder joints. No obvious bulging or leaking caps.
It's circa 2007 widescreen model. Any ideas on continuing appreciated (including where exactly to test for voltages). See attached pics
So, looking close at Power Board first. No obvious cold solder joints. No obvious bulging or leaking caps.
It's circa 2007 widescreen model. Any ideas on continuing appreciated (including where exactly to test for voltages). See attached pics