I have a problem with my samsung washer main control board. The washer would cycle on/off constantly every minute or two after turning it on or running a cycle.
I know it's the board, as I replaced the entire board and it fixed the issue. I am now trying to repair the old board.
Does anyone have the schematic for this board? couldn't find it anywhere.
Model: DC92-01621A
I started checking the relays, and they were all good, except I accidentally applied voltage on the wrong polarity on one and blew the diode. How do I find what spec diode I need to support this relay?
Relay: HF32F/012-HS3
I will be checking the capacitors next. Do anyone have experience repairing samsung boards and what is the typical failure? I see lots of issues with samsung boards online, but everyone just replaces the entire board, could not find any information on actual board repair. Possibly because it is a PITA as they coat the whole PCB with some kind of water proof membrane and it's a pain to remove to work on the components.
I know it's the board, as I replaced the entire board and it fixed the issue. I am now trying to repair the old board.
Does anyone have the schematic for this board? couldn't find it anywhere.
Model: DC92-01621A
I started checking the relays, and they were all good, except I accidentally applied voltage on the wrong polarity on one and blew the diode. How do I find what spec diode I need to support this relay?
Relay: HF32F/012-HS3
I will be checking the capacitors next. Do anyone have experience repairing samsung boards and what is the typical failure? I see lots of issues with samsung boards online, but everyone just replaces the entire board, could not find any information on actual board repair. Possibly because it is a PITA as they coat the whole PCB with some kind of water proof membrane and it's a pain to remove to work on the components.