Maker Pro
Maker Pro

Security camera too bright

R

RW

Jan 1, 1970
0
I have a security camera that plugs into the AV jacks of my TV. The
picture is much brighter (blown whites) than when I watch off air
broadcasts. If I turn down the brightness the camera looks ok but then
everything else is dark. If I connect a potentiometer to the video
line and connect the wiper to the TV would that change the brightness?
 
M

Michael A. Terrell

Jan 1, 1970
0
Dan said:


Along with the sync signal which can cause the monitor not to lock
onto the source. Is the video input terminated at 75 ohms? Some are
high impedance to loop multiple monitors and require an external 75 ohm
terminator. A few have a switchable 75 Ohm termination.
 

mykah093

Oct 26, 2010
1
Joined
Oct 26, 2010
Messages
1
I think you should change that camera with another camera. See if the problem moves to the new location. If yes, then camera is the problem. If no, then maybe settings or wiring is the problem of your security camera. Good luck!

my paper blog
 
Last edited:
Top