sensormatic amb-2011 power cord pinout?

[Twissted1]

Have a couple Sensormatic AMB-2011 valuepads that the power plug has been clipped on, Originally a rj45 connector but I cannot find what pinout is or a schematic of the power supply anywhere. if anyone knows what pins carry what voltage that would be hugely appreciated. I know it's 18v but don't know which pins carry what voltage... I'm a novice at this but know how to make rj45 connectors so I'm hoping to be able to fix something up...

 

[Martaine2005]

Hi, does it have RJ45 on both ends?. These would normally mirror each other. Not always of course.
You could open the device and check what voltage goes to the pins with a multimeter.

Martin