Maker Pro
Maker Pro

Sentrysafe

Foxtrot4916

Feb 24, 2023
3
Joined
Feb 24, 2023
Messages
3
Hello, I would post the model ID but for the life of me I do not see it anywhere on it.



Anyhow, the connection between the pcb and the keypad broke and Im having difficulty finding the specific connector for it. Curious if you guys could help me out. The wire itself was 26awg.

 

Attachments

  • 20230224_161153.jpg
    20230224_161153.jpg
    330.8 KB · Views: 8

Bluejets

Oct 5, 2014
6,932
Joined
Oct 5, 2014
Messages
6,932
empty socket partly obscured.
Did you check the photo before uploading to see if it was clear and showed what you wanted....probably a good idea.
Anyhow, appears to be 4 pin.
However, important bit is ....................you will need to measure the pin pitch ................and the type is as you say, JST.
 

Foxtrot4916

Feb 24, 2023
3
Joined
Feb 24, 2023
Messages
3
Here is a clear image of the pin connector Im talking about. Im starting to think I need the 1.5mm since the last wires were 2mm.
 

Attachments

  • 20230225_153806.jpg
    20230225_153806.jpg
    284 KB · Views: 1
Top