Maker Pro
Maker Pro

Simple Gate driver circuit help needed

teletups

Mar 5, 2023
12
Joined
Mar 5, 2023
Messages
12
Can someone please point me to a circuit that is the same as the image below?
What model chip is best to use that is commonly available?

gate driver.png
 

teletups

Mar 5, 2023
12
Joined
Mar 5, 2023
Messages
12
it must be a high-speed switching driver chip. i use 1-5MHZ pulsed wave from the signal generator.
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Show a schematic. Guessing - it's a pair of FETs (maybe even a bridge).
 

AnalogKid

Jun 10, 2015
2,925
Joined
Jun 10, 2015
Messages
2,925
Can someone please point me to a circuit that is the same as the image below?
"the same" in what way?

Same chip - only you know that.

Same size - only you know the size of the board.

Same 9 V input - is that from a 9 V battery, an external control signal, or something else - only you know.

Same input frequency - we don't know what that is.

Same output - we don't know the characteristics of the "coil."



"What model chip is best to use that is commonly available?"

No clue. What model chip is on the board you have now?

ak
 

teletups

Mar 5, 2023
12
Joined
Mar 5, 2023
Messages
12
i just need a basic gate driver circuit. this image is just a reference to what I need but I have no more info on that.
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
What is it that you're trying to achieve? Got a schematic or an accurate description of the set up? Nothing you've said seems to make sense i.e. we need to know what it is you're doing in order to give advice.
 
Top