Hi, Im very green to electronics and this "simple" project is getting the best of me. I want to run a servo off a tiny photoresistor and a 9v battery. I would like to keep everything as small as possible.
Specs:
The Photoresistor:
- Min Voltage-150 volt DC
-Max wattage 90 mW
-spectral peak 540nm
-Light resistance 0.5 Mohm
-100 10:0.7 ??
-Responsive time up:20 Down:30
-Illumination resistance 4
The Servo:
-Current draw idle 6mA
-Current draw stall 350mA
-Voltage 4.8 - 8.5V
Thanks for any help!!
Best Regards, Justin
Specs:
The Photoresistor:
- Min Voltage-150 volt DC
-Max wattage 90 mW
-spectral peak 540nm
-Light resistance 0.5 Mohm
-100 10:0.7 ??
-Responsive time up:20 Down:30
-Illumination resistance 4
The Servo:
-Current draw idle 6mA
-Current draw stall 350mA
-Voltage 4.8 - 8.5V
Thanks for any help!!
Best Regards, Justin