Maker Pro
Maker Pro

Simpson 260 series 8

I have a Simpson 260 series 8 meter with two burned resistors. Simpson
will not provide a schematic for these anymore citing some BS safety
requirement. I would have to send it to them for repair. Of course I
would! Does anyone have this model who could please look at the
section of the board I would identify in question and tell me what
resistors are in those positions? I would sincerely appreciate any
help with this. Thanks, Lenny
 
A

Archon

Jan 1, 1970
0
I have a Simpson 260 series 8 meter with two burned resistors. Simpson
will not provide a schematic for these anymore citing some BS safety
requirement. I would have to send it to them for repair. Of course I
would! Does anyone have this model who could please look at the
section of the board I would identify in question and tell me what
resistors are in those positions? I would sincerely appreciate any
help with this. Thanks, Lenny
Maybe this site will help :

http://simpson260.com/downloads/downloads.htm


JC
 
A

Archon

Jan 1, 1970
0
I've been there but there's no schematics for the series 8 though.
Lenny

I'm not familiar with these meters but there is the schematic for
Simpson 260 Series 8 - VOM 260-8xi 1969 Edition

Is that not the same?

JC
 
A

Archon

Jan 1, 1970
0
Archon said:
I'm not familiar with these meters but there is the schematic for
Simpson 260 Series 8 - VOM 260-8xi 1969 Edition

Is that not the same?

JC
Correction : 2001 Edition

JC
 
F

Franc Zabkar

Jan 1, 1970
0
I have a Simpson 260 series 8 meter with two burned resistors. Simpson
will not provide a schematic for these anymore citing some BS safety
requirement. I would have to send it to them for repair. Of course I
would! Does anyone have this model who could please look at the
section of the board I would identify in question and tell me what
resistors are in those positions? I would sincerely appreciate any
help with this. Thanks, Lenny

There are quite a few Simpson manuals here:
ftp://bama.sbc.edu/downloads/simpson/

Unfortunately the following is only a user manual:
ftp://bama.sbc.edu/downloads/simpson/260-8/

FWIW, I notice that the 260 Series 5 has resistor strings that are
similar to those in the 260-8xi.

If you could tell us the values of other resistors in the same string,
then perhaps we could work out the values of the burnt ones.

- Franc Zabkar
 
There are quite a few Simpson manuals here:ftp://bama.sbc.edu/downloads/simpson/

Unfortunately the following is only a user manual:ftp://bama.sbc.edu/downloads/simpson/260-8/

FWIW, I notice that the 260 Series 5 has resistor strings that are
similar to those in the 260-8xi.

If you could tell us the values of other resistors in the same string,
then perhaps we could work out the values of the burnt ones.

- Franc Zabkar

I've written to Simpson and included a diagram of the board which
shows the burnt resistors. We'll see if they respond favorably. I'll
let you know. Thanks, Lenny.
 
Top