Maker Pro
Maker Pro

Simulation Difficulty With KiCad 7.0

bsion

Jun 13, 2023
1
Joined
Jun 13, 2023
Messages
1
Hi, I'm using KiCad Like a Pro 3rd edition to do The circuit simulator (13.29). I am following all of the instructions but when I go to run the simulation I get this:
1686688362520.png
which is very confusing as I didn't deviate from what I was reading.
Here's the circuit:
1686688415438.png
and I can provide any additional info as needed.
Any help would be greatly appreciated.

Thanks,
BS
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,758
Joined
Nov 17, 2011
Messages
13,758
Looks like trr is interpreted to be a parameter of a transmission line - but there is no transmission line in your circuit.
I assume what you want is trr to be a parameter of the LED. See this tutorial:
1686718283880.png
which is not exactly about KiCad. but uses this parameter.
Alternatively simply remove the trr statement from your schematic.
 

Minder

Apr 24, 2015
3,479
Joined
Apr 24, 2015
Messages
3,479
There is also a very good Kicad help forum, worth joining.
 
Top