Maker Pro
Maker Pro

Slightly OT-Wireless Card Problem

K

Kim Sleep

Jan 1, 1970
0
Whenever I attempt to add a internal Wireless Network Card into my computer
(Windows XP) my computer "dies". It does turn on, but my screen is blank. I
have tried several cards, from several companies, all with the same outcome.
As soon as I remover the card, the computer comes back to life
Any ideas??
Thanks.
 
C

Chaos Master

Jan 1, 1970
0
Kim said:
Whenever I attempt to add a internal Wireless Network Card into my computer
(Windows XP) my computer "dies". It does turn on, but my screen is blank. I
have tried several cards, from several companies, all with the same outcome.
As soon as I remover the card, the computer comes back to life

Is it a PCI card or PCMCIA card (if using a portable PC)? If it's a PCI
card then maybe it's an IRQ conflict (?) with the video card?

[]s
--
Chaos Master®, posting from Canoas, Brazil - 29.55° S / 51.11° W

"Now: the 2-bit processor, with instructions:
1. NOP - does nothing, increase PC.
2. HLT - does nothing, doesn't increase PC
3. MMX - enter Pentium(r) emulation mode; increase PC
4. LCK - before MMX: NOP ; after MMX: executes F0 0F C7 C8 "
 
Top