Maker Pro
Maker Pro

Small Screw Driver for AGC Pot


W. Watson

Jan 1, 1970
I have a video camera that has a small pot AGC whose cross-like screw is about 1/2"
across. It's in the back of the camera and mounted in such a way that trying to
adjust the pot requires removing the camera. It would be god if I had something of a
screw driver about 1" long that I could either wedge into the cross or glue it in, so
that I could adjust the AGC without removing the camera. Are such items made? If not,
I'll be searching for a small piece of plastic I can use.

Here's a look at the camera <>. See the back plate
drawing at the bottom of the page on the right. That's as much detail as I can provide.
Wayne T. Watson (121.015 Deg. W, 39.262 Deg. N, 2,701 feet, Nevada City, CA)
-- GMT-8 hr std. time, RJ Rcvr 39° 8' 0" N, 121° 1' 0" W

"Don't you just hate it when someone leaves their call back phone
number at 100 digits a second? And worse. At the end of a long message."
-- Andy Rooney (in disguise)

Web Page: <>
sierra_mtnview -at- earthlink -dot- net
Imaginarium Museum: <>