Maker Pro
Maker Pro

Solartron 7150 Manual needed.

N

njkenworthy

Jan 1, 1970
0
Looking for an E-copy of a Solartron 7150 manual OR a clue as to why the
unit is only responding to the keypad in columns as opposed to as it should
as a matrix. ie keypad is 3col x 4row matrix but only 3 functions available,
all keys in one column produce same reult.
All functions available via GPIB and all scales/ranges in good order.
 
J

Joerg Hau

Jan 1, 1970
0
Hi
Looking for an E-copy of a Solartron 7150 manual OR a clue as to why
the unit is only responding to the keypad in columns as opposed to
as it should as a matrix. ie keypad is 3col x 4row matrix but only 3
functions available, all keys in one column produce same reult.

The User's Manual does not say anything about such a state ... in
other words, this is not "expected behaviour". If the 7150 is _not_
in local lockout state, every single key (mode/range settings etc)
should react as you expect them to do.

Just to be sure: did you disconnect it from the GPIB bus? You did not
accidently - via GPIB - send it into calibration mode (where it would
no longer react to the front keys either)?

Cheers + HTH,

- Joerg
 
Top