Maker Pro
Maker Pro

Sony DVP-CX777ES issues.

KTKelly

Dec 12, 2020
1
Joined
Dec 12, 2020
Messages
1
I have a few of these mega changers that have failed, and would really like to bring them back to a working condition.

Problems I've had were the C 32 code which new drive belts fixed for under $10.00, but there are other issues.

Working on one unit that won't play a disc, but shows "Ddisc is dirty" or :"cannot read disc" on the front panel display then the unit will finally shut itself off.

I think this my be due to a bad laser assembly, but am not sure so I'm wondering if I should see any visible light from the laser area (difficult what with the design of these changers).

I've cleaned the lens as best I can tell, but no joy in Mudville as yet.

TIA for any help....
 
Top