Maker Pro
Maker Pro

Sony Monitor excessive brightness CPD-E400

T

Tim Marcus

Jan 1, 1970
0
This monitor is mine if I can repair it. The symptom is excessibe
brightness with retrace lines. Screen control on the flyback does
nothing. Voltage at G2 is like 660V or something - I am pretty sure
this might be too high. All resistors in the G2 circuit seem to be ok,
and I replaced a high voltage cap as well just in case. Basically the
crt board (at least the part directly attatched to the tube) checks
fine.

Could this be a result of something near the flyback- or the flyback
itself?
Has anyone seen a case history on this model?

As usual, any and all advice is highly appreciated. - Tim
 
J

James Sweet

Jan 1, 1970
0
Tim Marcus said:
This monitor is mine if I can repair it. The symptom is excessibe
brightness with retrace lines. Screen control on the flyback does
nothing. Voltage at G2 is like 660V or something - I am pretty sure
this might be too high. All resistors in the G2 circuit seem to be ok,
and I replaced a high voltage cap as well just in case. Basically the
crt board (at least the part directly attatched to the tube) checks
fine.

Could this be a result of something near the flyback- or the flyback
itself?
Has anyone seen a case history on this model?

As usual, any and all advice is highly appreciated. - Tim

Yes, look around the flyback for an open resistor, I've seen this a number
of times on older monitors.
 
T

Tim Marcus

Jan 1, 1970
0
Yes, look around the flyback for an open resistor, I've seen this a number
of times on older monitors.

Thanks- I'll get back on it on monday - Tim
 
H

H. Weber

Jan 1, 1970
0
This monitor is mine if I can repair it. The symptom is excessibe
brightness with retrace lines. Screen control on the flyback does
nothing. Voltage at G2 is like 660V or something - I am pretty sure
this might be too high. All resistors in the G2 circuit seem to be ok,
and I replaced a high voltage cap as well just in case. Basically the
crt board (at least the part directly attatched to the tube) checks
fine.

Could this be a result of something near the flyback- or the flyback
itself?
Has anyone seen a case history on this model?

As usual, any and all advice is highly appreciated. - Tim

Try this site: ftp://147.213.74.111/Schemy/Monitory and go to
sony_cpd e 400 pdf to get a manual if you dont have one already.

HW
 
Top