Maker Pro
Maker Pro

Sony PFM-510A1WU Plasma Problem

B

Buster Lynn

Jan 1, 1970
0
I have a Sony model PFM-510A1WU.
I have a problem with the display, and figure out what to do next.
It only has a picture in the left half of the screen
Menu will display across the screen, but picture in only left half.
I tried resetting the EPROM's, but still the same problem.
Any ideas would be greatly appreciated.
Thx,
 
J

JANA

Jan 1, 1970
0
If it is more than a loose connection or something you can visually find,
you will not be able to service this yourself. These are serviced with board
swapping, and then using the proper factory service set-up systems to
properly calibrate the set. There are specialized instruments and tools
required to service these plasma sets. Call your local Sony service rep to
have the set properly repaired.

--

JANA
_____


I have a Sony model PFM-510A1WU.
I have a problem with the display, and figure out what to do next.
It only has a picture in the left half of the screen
Menu will display across the screen, but picture in only left half.
I tried resetting the EPROM's, but still the same problem.
Any ideas would be greatly appreciated.
Thx,
 
Top