Maker Pro
Maker Pro

sony wega: how to separte channel tuner section

R

ruleworld

Jan 1, 1970
0
i have a sony wega 25" tv. its picture tube has problems. the reapir
man lowered heater resistor to give better color and after sometimes
the power circuit has a burst and it now won't start. i want to
separate and use its channel tuner. anybody know how much volt i have
to give to power that section and where? thanks
 
J

JANA

Jan 1, 1970
0
You cannot separate the tuner unit and use it. There is also the IF module,
and then the video and audio detector and processing. These circuits are all
controlled with a microprocessor that follows a firmware program. The way
it is designed, what you want to do is very complex and expensive. A simple
solution is to buy a TV tuner receiver, or get a VCR to use as a TV tuner.

--

JANA
_____


i have a sony wega 25" tv. its picture tube has problems. the reapir
man lowered heater resistor to give better color and after sometimes
the power circuit has a burst and it now won't start. i want to
separate and use its channel tuner. anybody know how much volt i have
to give to power that section and where? thanks
 
Top