Maker Pro
Maker Pro

Source for Intermatic plastic pinion gears

S

Sam Goldwasser

Jan 1, 1970
0
You know those tiny inserts in timers and clocks that crumble after time.
They are the plastic pinion gear that fits into the magnetic rotor of
the common Intermatic timing motors.

Does anyone have a source for just these pieces? I have several
appliances that are either inoperative or from which I've been
"borrowing" these pieces to fix others.

A typical motor part number is WG-1420-1.

Thanks.

--- sam
 
N

N Cook

Jan 1, 1970
0
Sam Goldwasser said:
You know those tiny inserts in timers and clocks that crumble after time.
They are the plastic pinion gear that fits into the magnetic rotor of
the common Intermatic timing motors.

Does anyone have a source for just these pieces? I have several
appliances that are either inoperative or from which I've been
"borrowing" these pieces to fix others.

A typical motor part number is WG-1420-1.

Thanks.

--- sam

Do they have to be plastic for noise or vibration reasons ?
I ended up with a load of clock repairers spare pinions , but all are brass
or steel or combination of both.
 
S

Sam Goldwasser

Jan 1, 1970
0
N Cook said:
Do they have to be plastic for noise or vibration reasons ?
I ended up with a load of clock repairers spare pinions , but all are brass
or steel or combination of both.

The material probably doesn't matter but the specific part I'm referring
to actually fits into a mating recepticle - it isn't a gear that goes on
a shaft.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.
 
M

Mike Berger

Jan 1, 1970
0
I've had some luck finding replacement parts like that by digging
through the servo spares box at the local RC model hobby shop.
 
S

Sam Goldwasser

Jan 1, 1970
0
Mike Berger said:
I've had some luck finding replacement parts like that by digging
through the servo spares box at the local RC model hobby shop.

Thanks but these are not normal pinion gears. They fit a socket on the
magnetized rotor with a specific shape. So, either an exact replacement
is needed or the entire rotor needs to be replaced.

Yes, possibly something could be modified, but that kind of defeats the
purpose of just being able to drop in a replacement for a 5 cent part.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.
 
Top