Maker Pro
Maker Pro

Source for transistor outline dimensions needed

H

hr(bob) [email protected]

Jan 1, 1970
0
Can anyone give me an address for a source that gives the dimensions
of various transistor cases, TO-5, etc? I struck out using Google.

Bob Hofmann
 
H

hr(bob) [email protected]

Jan 1, 1970
0
Dayum!

I tried every trick I could think of:

"standard semiconductor packages" *
"standard transistor outlines"
"transistor outlines"
to-3 to-220
ieee iso

and a bunch more. Nada. Zip. Zero.

Who the hell is the keeper of those standards? I woulda thought it would
be an ISO standard, or perhaps IEEE.

* By the way, you do know, don't you, that you can tightly restrict a
Google search by putting the search phrase in quotes, right?

--
Made From Pears: Pretty good chance that the product is at least
mostly pears.
Made With Pears: Pretty good chance that pears will be detectable in
the product.
Contains Pears:  One pear seed per multiple tons of product.

(with apologies to Dorothy L. Sayers)

Hi Dave:

I tried everything I could think of, I'm not sure who sets the
standards, and I am an IEEE member and then some. Yes, I use
"asdhjkfashjdf" frequently.

Bob H
 
R

Rich Webb

Jan 1, 1970
0
Hi Dave:

I tried everything I could think of, I'm not sure who sets the
standards, and I am an IEEE member and then some. Yes, I use
"asdhjkfashjdf" frequently.

That would be JEDEC Publication 95. The sections are available for
download after registration. http://www.jedec.org
 
D

David Nebenzahl

Jan 1, 1970
0
Can anyone give me an address for a source that gives the dimensions
of various transistor cases, TO-5, etc? I struck out using Google.

Dayum!

I tried every trick I could think of:

"standard semiconductor packages" *
"standard transistor outlines"
"transistor outlines"
to-3 to-220
ieee iso

and a bunch more. Nada. Zip. Zero.

Who the hell is the keeper of those standards? I woulda thought it would
be an ISO standard, or perhaps IEEE.


* By the way, you do know, don't you, that you can tightly restrict a
Google search by putting the search phrase in quotes, right?


--
Made From Pears: Pretty good chance that the product is at least
mostly pears.
Made With Pears: Pretty good chance that pears will be detectable in
the product.
Contains Pears: One pear seed per multiple tons of product.

(with apologies to Dorothy L. Sayers)
 
H

Heinz Schmitz

Jan 1, 1970
0
B

Baron

Jan 1, 1970
0
hr(bob) [email protected] said:
Can anyone give me an address for a source that gives the dimensions
of various transistor cases, TO-5, etc? I struck out using Google.

Bob Hofmann

Don't the device manufacturers give that information ?
 
E

Eeyore

Jan 1, 1970
0
hr(bob) [email protected] said:
Can anyone give me an address for a source that gives the dimensions
of various transistor cases, TO-5, etc? I struck out using Google.

Yes, get a data sheet for one. The major semi manufacturers all publish
detailed dimensions.

Graham
 
E

Eeyore

Jan 1, 1970
0
hr(bob) [email protected] said:
Hi Dave:

I tried everything I could think of, I'm not sure who sets the
standards,
JEDEC.

and I am an IEEE member and then some. Yes, I use
"asdhjkfashjdf" frequently.

What device are you using ? Try using some common sense.

Graham
 
E

Eeyore

Jan 1, 1970
0
Baron said:
Don't the device manufacturers give that information ?

They do. Usually on the data sheet of the device in question.

Graham
 
They do. Usually on the data sheet of the device in question.

Graham

I have a number of known good, but unknown types of transistors,
scrapped from working electronics that I did not want to keep or pass
on to Goodwill. I googled on the codes on the transistors, but got
too many replies. I thought if I could figure out which TO-XXX the
cases were, I would narrow my search somewhat. I don't know the case
sizes by just looking at them as I normally do not worry about the TO-
XXX case when replacing known transistors. I will try the JEDEC site.

Bob Hofmann
 
G

Geoffrey S. Mendelson

Jan 1, 1970
0
msg said:
I encourage everyone with interest in maintaining a vibrant electronics
reuse ethic to write to your area Goodwill management offices to complain
and request a sane policy towards electronics donations.

I am located far from the problem, but from what I have read in the last
few years, Goodwill and similar organizations have become the dumping ground
for unusable, unrepairable, electronic trash which costs them money to recycle.

Many of them have stopped accepting anything electronic that can not be
sold for enough money to cover the cost of legally getting rid of the parts
that come with it that are of no value.

Quite simply, unless you are willing to volunteer the time to sort it for
them and dispose of the nonsaleable stuff, the only sane policy is to
refuse any donations of electronics.

Geoff.
 
E

Eeyore

Jan 1, 1970
0
hr(bob) [email protected] said:
I have a number of known good, but unknown types of transistors,
scrapped from working electronics that I did not want to keep or pass
on to Goodwill. I googled on the codes on the transistors, but got
too many replies. I thought if I could figure out which TO-XXX the
cases were, I would narrow my search somewhat. I don't know the case
sizes by just looking at them as I normally do not worry about the TO-
XXX case when replacing known transistors. I will try the JEDEC site.

There are only a few relatively popular ones. Some Japanese or European
devices may have non-JEDEC specified cases. And some manufacturers, notably
Motorola at one time had 'in-house' case designs.

Graham
 
R

Rich Webb

Jan 1, 1970
0
I went there, 18000 pages. I just want outlines for commonly used
transistors in tv sets.

If you follow the links, it's easy to drill down to just the one-page
pdf for a given type; downloading the entire volume isn't required.
Nonetheless, the answer to "who sets the standards" is JEDEC.
 
D

David Nebenzahl

Jan 1, 1970
0
I am located far from the problem, but from what I have read in the last
few years, Goodwill and similar organizations have become the dumping ground
for unusable, unrepairable, electronic trash which costs them money to recycle.

Many of them have stopped accepting anything electronic that can not be
sold for enough money to cover the cost of legally getting rid of the parts
that come with it that are of no value.

Quite simply, unless you are willing to volunteer the time to sort it for
them and dispose of the nonsaleable stuff, the only sane policy is to
refuse any donations of electronics.

There are places that do exactly that.

F'rinstance, my favorite recycled-goods vendor, Urban Ore in Berkeley,
has tons of electronic equipment, all sold "as-is" with no guarantee of
working or not. Much of it does work; a lot of stuff is "vintage" (like
old tube-operated equipment), so you takes your chances with it. In any
case, they move a lot of stuff through their store.

Obviously they need to get rid of a lot of electronic crap that doesn't
sell. Turns out that at least here (Alameda County), there are funded
programs which handle consumer electronics waste. There's a place in
Berkeley where I can take any electronic stuff--computer monitors, PCs,
TVs, etc.--for disposal, for free, no questions asked.

Too bad this isn't the case everywhere.


--
Made From Pears: Pretty good chance that the product is at least
mostly pears.
Made With Pears: Pretty good chance that pears will be detectable in
the product.
Contains Pears: One pear seed per multiple tons of product.

(with apologies to Dorothy L. Sayers)
 
Top