Maker Pro
Maker Pro

Speaker box project. Need a little help

Camg

Jun 3, 2016
3
Joined
Jun 3, 2016
Messages
3
Hi all,
I'm new to this forum and new to this hobby. It's my first project and I've done a ton of studying about electronics in the past few months, but I haven't even scratched the surface haha. So if someone could help me it would be much appreciated.

I'm building a portable speaker box.
It has a tpa3116 (sanwu blue) 50w x2
A 12v psu
And a 12ah 12v battery.

I just need to find a way to have one switch to switch it from just using the battery, just using psu, just using battery charger or both battery charger and psu together.

I've tried to make a schematic of what might work but yeah please help out where you can :)

(The yellow box is one switch)58fb0761-2b3b-429a-9e8d-658585bd6ee0.png
 

Camg

Jun 3, 2016
3
Joined
Jun 3, 2016
Messages
3
Anyone? :)
Im really struggling to find a switch that will work
 
Last edited:

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
You have three switches there, which do you mean?

Please redraw your schematic with a common rail along the bottom and the mains and low voltages separate.
I do not know what the bolt in the centre is.
 

Camg

Jun 3, 2016
3
Joined
Jun 3, 2016
Messages
3
Ah right. Here it is. The black box will be a main switch. Only one can be on at a time.
Will this work? Or is there a better way because I'm struggling to find a switch to suit.
 

Attachments

  • a33e22a2-2a38-4aae-a24a-cb55f38de51f.png
    a33e22a2-2a38-4aae-a24a-cb55f38de51f.png
    183.4 KB · Views: 117
Top