Maker Pro
Maker Pro

Specs for Harris electronic flash chip?

  • Thread starter Samuel M. Goldwasser
  • Start date
S

Samuel M. Goldwasser

Jan 1, 1970
0
I might have asked about this a couple years ago here goes again:

Does anyone have specifications or has determined a pinout for
the Harris 988754 IC, the micro strobe brain from electronics goldmine?

At one point, I had gotten it to do something but never actually work
properly, and blew up at least one of them in the process.

Thanks!

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
N

N_Cook

Jan 1, 1970
0
Samuel M. Goldwasser said:
I might have asked about this a couple years ago here goes again:

Does anyone have specifications or has determined a pinout for
the Harris 988754 IC, the micro strobe brain from electronics goldmine?

At one point, I had gotten it to do something but never actually work
properly, and blew up at least one of them in the process.

Thanks!

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.


what sort of date ?
 
S

Samuel M. Goldwasser

Jan 1, 1970
0
what sort of date ?

97

Thanks!

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
F

Franc Zabkar

Jan 1, 1970
0
I might have asked about this a couple years ago here goes again:

Does anyone have specifications or has determined a pinout for
the Harris 988754 IC, the micro strobe brain from electronics goldmine?

Is this it?
http://www.goldmine-elec-products.com/prodinfo.asp?number=G4584A
At one point, I had gotten it to do something but never actually work
properly, and blew up at least one of them in the process.

Thanks!

Try searching for "photoflash charger" here:
http://www.datasheetarchive.com/search.php?q=photoflash+charger&searchtype=default&p=1

I didn't see any Intersil or Harris parts, but here is one datasheet
for an 8-pin part that includes an application circuit:
http://www.datasheetarchive.com/datasheets/Datasheet-029/DSA00513693.pdf

It may give you some clues as to pinout and function.

Have you tried tracing the circuit?

- Franc Zabkar
 
Top