Maker Pro
Maker Pro

Stun Gun PCB Design

Status
Not open for further replies.

eren581

Mar 31, 2013
2
Joined
Mar 31, 2013
Messages
2
Hi I am interested in electronics as hobby and I've just downloaded the e-book 50 555 circuits. I saw the schematic for the 555 stun gun. I want to apply it on PCB. I used the Eagle CAD to do PCB drawing of the circuit and I want you to check if it works when I apply it on PCB. I attached the files. This is the first time I'm trying to do it.

Notes: I added a via nar the pin 5 and the 100 nf capacitor to connect them each other. I didn't valued all of them. I add the image for who doesn't have the Eagle software.
I am waiting for your help :)

6244443500_1376673878.jpg
 

Attachments

  • stungun.zip
    8.2 KB · Views: 86

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
We're not going to help you with a stun gun.

Try with some other project and we will.
 
Status
Not open for further replies.
Top