Maker Pro
Maker Pro

Suggest hard to find switch component, please ?

Externet

Aug 24, 2009
838
Joined
Aug 24, 2009
Messages
838
Hi.
Does anyone know a vendor source for a sliding magnet captive in a slot component for a trough-wall activation of a hall effect sensor or reed; that can be glued/attached ?

The one in first picture is molded into the body; am looking for something that can be attached to an existing wall as the next image.
201505251418039830.jpg


This is attached :

Brinyte-Black-LED-Sealing-Diving-Flashlight-Torch-Aluminum-Portable-Magnetic-Switch-Waterproof-Underwater-200m-Dive-Flash.jpg_640x640.jpg
 

Bluejets

Oct 5, 2014
5,985
Joined
Oct 5, 2014
Messages
5,985
Interesting but never seen any like it.
I think it might be one of those things you'll have to make up yourself. ( al-la 3d printer)
Definetely would not want to buy the trustfire torch just to rip the switch out. Did you see the price...? WOW some torch

Here is a " plastic canopy latch" for rc that you might be able to adapt.
https://www.ebay.com.au/itm/Canopy-...723703&hash=item4d8fd70b6d:g:evQAAOSwR7xcnYQM
 
Last edited:

Externet

Aug 24, 2009
838
Joined
Aug 24, 2009
Messages
838

Bluejets

Oct 5, 2014
5,985
Joined
Oct 5, 2014
Messages
5,985
Time to call in a favour from a mate with a 3d printer by the looks of it..... :)
 
Top