Maker Pro
Maker Pro

Sun beam mattress controller flashes

Johnbauer

Nov 4, 2021
2
Joined
Nov 4, 2021
Messages
2
I bought a sun beam mattress pad and the controller only flashes. I made sure it has a good connection. I measured the voltage and only get about 40 volts across the two outside pins. I opened the controller and noticed a burnt smell but I can't identify any burn components. I am unsure what my next step to repair it should be. It is a sun beam style s85kqa pn 19134e
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
If this is a heater then I'd not mess with it. The chances of receiving an electric shock and/or starting a fire are too high. In this particular case it would be sensible to dispose and replace.
 
Top