Maker Pro
Maker Pro

Swithching regulator (Buck Converter) with LTSpice question

RobinLeblond

Oct 20, 2018
1
Joined
Oct 20, 2018
Messages
1
Hello, I'm in the process of learning switching regulator and I'm using LTSpice as a simulator and teaching help. I found a video on YouTube explaining the SR, and I did exactly what it was demoed and didn't get the same results.

Simply said, I getting the same result but with a 300mV at the output instead of 5.6V, why ?

Here is the link of the video :

In attachment, you will find my LTSpice schema and a few screenshots.

Thanks a lot!
 

Attachments

  • 2018-10-20 10_44_05-Window.png
    37.1 KB · Views: 5
  • SBEC-T01.asc
    1.4 KB · Views: 7
Last edited:

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
That is rather logical as you've set D=0.05 whereas in the video it is D=0.5.
1/10 duty cycle -> 1/10 output voltage (roughly).

Cheers,
Harald
 
Top