Maker Pro
Maker Pro

TDA7492P board input

Pol

Sep 2, 2016
1
Joined
Sep 2, 2016
Messages
1
Hello
I've recently bought an amplifier board. It's everywhere and quite cheap, however I've noticed that there's two kinds of it and that they are very similar. One with minijack and one without it.

Stupid of me I bought the one without it and now I'm stuck without it. Is there any way I can solder a cable to the board? They are very similar (that's why i got it wrong in the first place) but I can't find the schematics for neither of them.

s-l500.jpg


s-l500.jpg

Thanks
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
It looks like there's more differences than just the jack.
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
Is there any way I can solder a cable to the board? They are very similar (that's why i got it wrong in the first place) but I can't find the schematics for neither of them.

a schematic would be VERY helpful to see what is going on with components in the area of the one with the socket and comparing that to the one without
just wild guessing without one ... may or may not be difficult to do circuit tracing in that area .... depends on how many track layers there are within the board
 
Top