Maker Pro
Maker Pro

Teac AD-1 Schematic

rdefayette

Mar 5, 2011
1
Joined
Mar 5, 2011
Messages
1
Does anyone have access to the circuit board schematic for a TEAC AD-1 cd/tape deck?
I have a bad resistor and can not tell what the value is as the color bars are toasted.:confused:
If it is any help it is the resistor in location #R304.
Thank you,
Bob
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
hey Bob, welcome to the forums :)

I cant help with a manual directly, it would be worth trying here .....
http://www.ebaman.com/ They have manuals for all sorts of gear

have you actually measured the resistor .. .out of circuit. ? it may be cooked by may still show its original resistance or something close to it, assuming it hasnt gone open cct.
Its most likely like that because something else down the line has gone short cct or close to it say a transistor or IC

Dave
 
Top