Maker Pro
Maker Pro

Technics SL-PD827 stuck open

Gibgrant

Nov 7, 2019
2
Joined
Nov 7, 2019
Messages
2
hey all. I was recently given a Technics SL-PD 827 5 disc CD changer, with one small problem. the CD tray opens, but will not close. Any ideas where to start?
 

73's de Edd

Aug 21, 2015
3,366
Joined
Aug 21, 2015
Messages
3,366
Sir Gibgrant . . . . .

I'm looking . . . . . .even harder now ! . . .my eyes are straining . . . . .

REFERENCE . . . .
https://i.giphy.com/media/GQI382aMVej0k/200.webp
(MAN ! That's being one uggggg-leeeeee maternal copulator )

I just can't make out ANYTHING on that relevant photo of the mechanics which you have NOT provided.

Otherwise . . . . .considering that the mechanical design is incorporating a motor that energizes to open / close . . . . load /unload
with a pulley on the motor and another with an interconnecting belt.
Confirm if that belt . . .with time and use / or / inactivity has gone "limp" and is just sitting immobile and slipping.
( There might be imbalanced / more mechanical effort / friction involved between open /closing . . . loading / unloading actions.)

Thaaaaaaassssssit . . . . .

73's de Edd . . . . .


All wiyht. Rho sritched mg kegtops awound?
( Copywight . . . . . . . . Elmer Fudd . . . . . 2019 )


.
 
Last edited:
Top