tektronix 2465 power problem

[feng]

Hi, I am new in this group.
I have a Tektronix 2465B scope which has power problem. when power it
on, all the GPIB Status lights are on, fan is moving, but no display
seen.
I don't have a service manual. But I measured the center pint at
J4244, it is +4.3v to ground. Other voltages on J232B is -11.3v and
+4.3v. Both voltages look like loss 0.7v. What parts, or section will
cause this kind problem?

Any help, or light are greatly appreciated.

feng

 

[carneyke]

Hi, I am new in this group.
I have a Tektronix 2465B scope which has power problem. when power it
on, all the GPIB Status lights are on, fan is moving, but no display
seen.
I don't have a service manual. But I measured the center pint at
J4244, it is +4.3v to ground. Other voltages on J232B is -11.3v and
+4.3v. Both voltages look like loss 0.7v. What parts, or section will
cause this kind problem?

Any help, or light are greatly appreciated.

feng

Capacitors in the power supply probably failed. I replied with a
detailed message a few years back on 2465 power supply troubles. You
should be able to google search it. I don't have access to a manual
anymore. They did have problems with filter caps and fans. Take Care