J
James Douglas
- Jan 1, 1970
- 0
I am building a 2m/6M radio receiver and studying it's design at the
same time. I am "lost" when it comes to visualizing how the I/F stuff
is working. I have "CircuitMaker" and wanted to create a circuit which
I could simulate and see how it's working but can't find a schematic of
how to do it?
I am interested in seeing how by combining two frequencies the output is
"the sum and difference" etc, and the basic working of Intermediate
Frequency. BTW the radio is a "dual conversion" type where it takes
the input freq and converts it to 10.7Mhz then converts again to
455Khz, etc. If it matters the kit is the Elenco AR-2N6 receiver.
Thanks!
Jim Douglas
same time. I am "lost" when it comes to visualizing how the I/F stuff
is working. I have "CircuitMaker" and wanted to create a circuit which
I could simulate and see how it's working but can't find a schematic of
how to do it?
I am interested in seeing how by combining two frequencies the output is
"the sum and difference" etc, and the basic working of Intermediate
Frequency. BTW the radio is a "dual conversion" type where it takes
the input freq and converts it to 10.7Mhz then converts again to
455Khz, etc. If it matters the kit is the Elenco AR-2N6 receiver.
Thanks!
Jim Douglas