Maker Pro
Maker Pro

TFT touchscreen lcd display replacement info

ivoltini

Jun 21, 2021
8
Joined
Jun 21, 2021
Messages
8
I would highly appreciate any help in resolving this. I have a damaged 5 inch TFT touchscreen display (800 x 480) Dot-matrix LCD (128x32)(6) screen that needs to be replaced. Unfortunately I am unable to find any more information off the assembly. I have spent days trying to find the right replacement however I could use some help. Please see the images for details. Thank you.
 

Attachments

  • 20230219_203711.jpg
    20230219_203711.jpg
    121.4 KB · Views: 6
  • 20230219_203340.jpg
    20230219_203340.jpg
    153.7 KB · Views: 6
  • 20230219_203500.jpg
    20230219_203500.jpg
    92.9 KB · Views: 6

Delta Prime

Jul 29, 2020
1,966
Joined
Jul 29, 2020
Messages
1,966
Make & model the device , the TFT display came out of. Please.
This is the best I can do using my crystal ball..
 

Attachments

  • tft.pdf
    438 KB · Views: 2

ivoltini

Jun 21, 2021
8
Joined
Jun 21, 2021
Messages
8
Make & model the device , the TFT display came out of. Please.
This is the best I can do using my crystal ball..
Thank you, Delta Prime, really appreciate the information. The display is from an instrument which was purchased 13 months ago for my son. Accidents do happen, and unfortunately, one such accident shattered the display. I did contact the reputable company however was told that they can offer me a new instrument with 20% discount as long as the damaged unit is returned. I am determined to find a workable solution.
 

danadak

Feb 19, 2021
767
Joined
Feb 19, 2021
Messages
767
What you might do is post at Renesas, Samsung, Sharp, EDT..... websites asking for a second source
replacement. The other possibility is you design a translation board to map Newhaven pinout to
another display, providing their signaling same.

Left hand column list of manufacturers :


Oddly enough I do not see a 128 x 64 filter choice in the table, which seems to say # manufacturers might be quite small.

Also do searches on "• Built-in ST7565R controller", maybe luck out that way.

Also contact Newhaven and get a list of their distributors, you might luck out and find a
display at a specific distributor....


Regards, Dana.
 
Last edited:

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
The display is from an instrument which was purchased 13 months ago for my son.
If we search using 'instrument' we get no where - it must have an actual purpose...... make, model number etc? Is there some reason you won't disclose this?
 

ivoltini

Jun 21, 2021
8
Joined
Jun 21, 2021
Messages
8
I would highly appreciate any help in resolving this. I have a damaged 5 inch TFT touchscreen display (800 x 480) Dot-matrix LCD (128x32)(6) screen that needs to be replaced. Unfortunately I am unable to find any more information off the assembly. I have spent days trying to find the right replacement however I could use some help. Please see the images for details. Thank you.
Please do let me apologies for mentioning the make and model because I needed to get it from my kid.
It is a synthesizer:
Make: Roland
Model: FA-06

Thank you.
 

ivoltini

Jun 21, 2021
8
Joined
Jun 21, 2021
Messages
8
What you might do is post at Renesas, Samsung, Sharp, EDT..... websites asking for a second source
replacement. The other possibility is you design a translation board to map Newhaven pinout to
another display, providing their signaling same.

Left hand column list of manufacturers :


Oddly enough I do not see a 128 x 64 filter choice in the table, which seems to say # manufacturers might be quite small.

Also do searches on "• Built-in ST7565R controller", maybe luck out that way.

Also contact Newhaven and get a list of their distributors, you might luck out and find a
display at a specific distributor....


Regards, Dana.
Thank you, Dana, appreciate your help. I have updated my post with make and model of the unit, I needed to get the info from my kid.
 

ivoltini

Jun 21, 2021
8
Joined
Jun 21, 2021
Messages
8
If we search using 'instrument' we get no where - it must have an actual purpose...... make, model number etc? Is there some reason you won't disclose this?
My apologies kellys-eye - I needed to get that info from my kid who is away.
Instrument: Synthesizer
Make: Roland
Model: FA-06
 
Top